- Extrusion Design
- Find a Member
- AEC Library
- Academic Resources
|Extrusion Design - Key Considerations|
Every manufacturing process has its limitations. For aluminum extrusions, there are practical limitations to the design flexibility. Some designs will prove very challenging to extrude, while minor tweaks to an extrusion design can often yield significant benefits in extrudability, and consequently, cost.
Here are some things to consider when designing with aluminum extrusions:
Circle SizeOne common measurement of the size of an extrusion is the diameter of the smallest circle that will entirely enclose its cross-section--its circumscribing circle diameter (CCD). The dimension is one factor in the economics of an extrusion. Most common profiles are less than 12 inches in diameter, a few extruders are capable of producing extrusions with a much larger CCD, some as large as 32 inches.
The weight-per-foot of a profile is important because of the effect it has on profitable press operation. Is the profile too heavy? Is it too light? Many factors affect press operation and the press size required to extrude a profile. Your extruder will provide the information you need to improve your profile design to run cost effectively.
Note: Generally, the design is greatly enhanced if the profile CCD is kept under 8 inches and the wt/ft is 3 pounds or less.
Good Aluminum Extrusion Design Practices
Availability of press sizes
Keep in mind the various profile circle size/area/weight combinations and the press sizes available to handle them.
North American Press Size Availability Chart
You can find more complete guidance on effective design of extruded components — along with a host of other extrusion technology information — in AEC's Aluminum Extrusion Manual.
Finally, most extruders have professionals on staff who are ready to help in optimizing your design for functionality and cost effectiveness. Go to Find an Extruder to locate a source near you.