Print Page   |   Sign In   |   Join
Extrusion Applications

An extrusion solution need not always be lineal!








Since their introduction in the late 1960's, compound bows have become increasingly popular with competitive archers and bow hunters. They are typically more energy efficient than traditional bows, more effectively leveraging, storing and releasing the energy input by the archer, leading to improved accuracy and arrow speeds.

The target in this project was to simplify the manufacturing process for a leading bow manufacturer. Prior versions were produced via forgings or aluminum bar stock, leading to extensive machining and requiring dedicated parts for each end model. The extruded solution was to extrude a large blank, from which bow riser blanks could be cut, machined, finished and assembled to produce a family of models from a single starting material.

  • Extrusion profiles can be designed to yield multiple riser models
  • Both right-hand and left-hand risers can be machined from the same profile
  • 8,600-ton direct press produces ultra wide extrusions and riser profiles up to 31” wide
  • The extrusion process, using a 6061-alloy, provides a stronger, more rigid, riser than those made using forging or casting
  • Precision cut-to-size blanks and water-jet cut parts, using nesting patterns, eliminates nearly all scrap

Click here for the What Is It? archive
Association Management Software Powered by YourMembership.com®  ::  Legal